| |

How to Fix Google Pixel Buds Right or Left Earbud Not Charging on Case

Google Pixel Buds are known for their impressive audio quality and seamless integration with Android devices. However, like any electronic gadget, these True Wireless Earbuds from Google can encounter issues from time to time. One common problem users face is when either the right or left earbud is not charging properly in the case.

This can be frustrating, but fear not – we’re here to guide you through the process of troubleshooting and fixing this issue.

Troubleshooting and Fixing Google Pixel Buds Right or Left Earbud Won’t Charge on Device Case

Mika Baumeister/Unsplash

Cleanliness is Key

Before diving into any technical solutions, you must ensure that your earbuds and their charging case are clean. Dust and debris can accumulate over time and interfere with the charging process. Here’s what you can do:

  • Inspect the Earbuds: Carefully examine the charging contacts on the earbuds and the case. If you notice any dirt or debris, gently clean them using a soft, dry cloth or a cotton swab. Be cautious not to damage the contacts.
  • Clean the Case: Open the case and inspect the charging pins inside. Use a small brush or compressed air to remove particles blocking the connection.

Restart and Reconnect

Sometimes, a simple restart and reconnection can resolve the charging issue. Here’s how to do it:

  • Place the Earbuds in the Case: Ensure both earbuds are correctly seated in their charging slots.
  • Close the Case Lid: Let the earbuds sit in the closed case for a minute or two.
  • Restart Your Device: Power cycle the device you connect your Pixel Buds to. This could be your smartphone, tablet, or any other compatible device.
  • Reconnect: Open the case lid and re-establish the connection between the earbuds and your device. This can often reset any charging problems.

Check for Software Updates

Google frequently releases software updates for its products, including the Pixel Buds. Outdated firmware could lead to charging issues. To ensure your Pixel Buds are running the latest software:

  • Connect to the Google Pixel Buds App: Open the Google Pixel Buds app on your device.
  • Check for Updates: In the app settings, look for the option to check for updates. If one is available, follow the on-screen instructions to install it.

Perform a Factory Reset

If the previous steps didn’t work, you might need to perform a factory reset on your Pixel Buds. This will erase all your saved settings, so be prepared to set them up again. Here’s how to do it:

  • Open the Pixel Buds Case: Make sure both earbuds are inside.
  • Press and Hold the Pairing Button: There’s a small button on the back of the case. Press and hold it for about 30 seconds until you see the earbud LED indicators blink white.
  • Reconnect: After the reset, reconnect your Pixel Buds to your device.

Contact Google Support

If all else fails and you still face charging issues with either the right or left earbud, it’s time to contact Google Support. They can provide specific guidance for your situation and may offer a replacement if your Pixel Buds are still under warranty.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *